Teflon® Powder Coatings Applied to Pumps, Mixers and Tanks

A full range of electro-statically Teflon® powder coatings applied to flow components requiring specific properties such as corrosion-resistance are available from Applied Plastics Co., Inc. of Norwood, Massachusetts.

Applied Plastics’ Teflon® Coatings are ideally suited for application onto pumps, mixers, tanks, valves and related components requiring chemical- and corrosion-resistance.  All surfaces are properly prepared and the firm can electro-statically powder coat from 0.0002” to 0.025” thick on parts weighing up to 2,000 lbs., depending upon the coating and substrate.

Tailored to customer requirements, Applied Plastics’ Teflon® Coatings include standard formulations such as Teflon® PTFE, FEP, PFA, Tefzel® ETFE, Teflon® S, Halar®, ECTFE, Kynar®, and Xylan®.  Custom formulations are also available to meet specific applications.

Applied Plastics’ Teflon® Coatings are priced according to formulation, part complexity, and quantity; applied in single to production quantities.

For more information contact:
Applied Plastics LLC
25 Endicott St. / P.O. Box 128
Norwood, MA 02062 USA
(781) 762-1881
[email protected]

Posted in

Superior medical devices require superior coatings.

Our proprietary PTFE Natural® coated mandrels offer unmatched benefits.


Low Coefficient of Friction

PTFE Natural® coatings provide a coefficient of friction generally in the range of 0.05 to 0.20, depending on the load and sliding speed.



PTFE Natural® coatings can operate continuously at temperatures up to 550°F and can be used for intermittent service up to 600°F with adequate ventilation.



Non-Stick Very few solid substances will permanently adhere to a PTFE Natural® coating. While tacky materials may show some adhesion, almost all substances release easily.



Chemical environments usually do not affect a PTFE Natural® coating. Only molten alkali metals and highly reactive fluorinating agents are known to affect this coating.



The proprietary PTFE Natural™ coating process enhances the substrate bonding surface to provide optimum lubricity without flaking or cracking.



Since PTFE Natural® finishes are both hydrophobic and oleophobic, cleanup is easier and more thorough.