Stainless Steel and Nitinol Hypotubes PTFE Coated to Precise Specifications

A PTFE coating service for stainless steel and nitinol hypodermic tubing used in manufacturing a wide range of medical devices is available from Applied Plastics Co., Inc. of Norwood, Massachusetts.

Applied Plastics’ Hypotube PTFE Coating Service precisely applies PTFE onto the O.D. of stainless steel or nitinol hypotubes with consistent thicknesses ranging from 0.00005” to 0.0005” thin with 0.0001” tolerance.  Suitable for all hypotube variations including spiral, skived, flared, crimped, ground, and slotted types, the firm can provide marker bands at precise intervals.

PTFE coatings are available in green, gray, black, and blue colors and Applied Plastics’ Hypotube PTFE Coating Service does not alter the physical properties of the customer supplied tubing.  In addition to coating, the firm can source the hypodermic tubing if required.

Applied Plastics’ Hypotube PTFE Coating Service is priced according to material, quantity, and special customer requirements.  Samples, price quotations, and literature are available upon request.

For more information contact:
Applied Plastics LLC
25 Endicott St. / P.O. Box 128
Norwood, MA 02062 USA
(781) 762-1881 
[email protected]
appliedplastics.com

Posted in

Superior medical devices require superior coatings.

Our proprietary PTFE Natural® coated mandrels offer unmatched benefits.

low-co-friction

Low Coefficient of Friction

PTFE Natural® coatings provide a coefficient of friction generally in the range of 0.05 to 0.20, depending on the load and sliding speed.

heat-resistance

HEAT-RESISTANCE

PTFE Natural® coatings can operate continuously at temperatures up to 550°F and can be used for intermittent service up to 600°F with adequate ventilation.

non-stick

Non-Stick

Non-Stick Very few solid substances will permanently adhere to a PTFE Natural® coating. While tacky materials may show some adhesion, almost all substances release easily.

chemical-resistance

CHEMICAL RESISTANCE

Chemical environments usually do not affect a PTFE Natural® coating. Only molten alkali metals and highly reactive fluorinating agents are known to affect this coating.

robust-coating

ROBUST COATING

The proprietary PTFE Natural™ coating process enhances the substrate bonding surface to provide optimum lubricity without flaking or cracking.

non-wetting

NON-WETTING

Since PTFE Natural® finishes are both hydrophobic and oleophobic, cleanup is easier and more thorough.